High service rating. Full-flow. Conventional design, for more flow than most ball valves. Bubble-tight, quarter turn shut-off. Use for fuel and/or water. Nickel plated surface, 304 SS handle & nut, chrome-plated brass ball.

View Product

3/4" - 3/4" S GATE VALVE: This valve is rated for maximum of 250 P.S.I. for use with water, oil, and air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Gate valves provide longest service life when used in full, open, or closed position. Nonrising stem.

View Product

3/4" - 3/4" GAS VALVE: Brass construction with 2-piece body. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures and temperatures up to 149 F. May be used with water. Threaded ends comply with ANSI B2.1. Both ends are Female pipe thread. Quarter-turn operation.

View Product

3/4", Brass Bent Nose Garden Valve, Female Thread Inlet, 3/4" Hose Thread Outlet, Cast Iron Handle, Large Full Flow Area, Pipe Threads Comply With ANSI 1.20.1, Hose Threads Comply With ANSI B.1.20.7.

View Product

Newport Brass 886/15 Roman Tub Deck Set. 3/4 Inch Valves|The picture above may not be accurate||THIS IS A CLOSE OUT ITEM

View Product

Premium grade. 200 lbs WOG (Water, Oil or Gas). Brass. 3/4" C X C ** This item is NOT available for shipment to the following state(s): CA VT

View Product

Specifications: Brass Ball Valve End Connections: 3/4? to 3/4? female NP 7250 PSI Ideal for high pressure situations 1/4'' Stainless Steel

View Product

BKIN1010: Features: -Gas ball valve.-600 PSI non-shock WOG.-Suitable for vacuum use up to 7 PSI.-CSA certified, UL listed, NSF approved, and FM-Fire protection rated.-External bottom check, approved by the American Gas Association.-Threaded ends comply with ANSI B2.1.-Port size: 0.886". Color/Finish: -Finish: Forged brass. Specifications: -150 PSI WSP steam. Dimensions: -Overall dimensions: ...

View Product

Long Bonnet Ball Valve, 3/4" Size, Solder x Solder, Brass, 600 PSI Non Shock WOG, -20 To 300 Degree Fahrenheit Temperature Range.

View Product

Forged brass. Chrome-plated ball. PTFE seats, blowout proof stem. Vinyl grip and vibration proof locknut. Temperature range: -20 F. to 350 F. (consult Jones Stephens for pressure rating when temperature is above 210 F.). AGA certified for use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures up to 2 P.S.I. Complies with federal specifications WW-V-35B. Type II, ...

View Product

The picture above may not be accurate||THIS IS A CLOSE OUT ITEM

View Product

3/4", Forged Brass, Gas Ball Valve, Flat/Square Head, Quarter Turn Operation, CSA 3-88 Certified, CSA Tamper Proof, UL Water 258, CSA Certified, 1 Piece Body, Chrome Plated Forged Brass Ball, Threaded Ends Comply With ANSI B1.20.1.

View Product

LDI1093: Features: -Gas ball valve.-Two piece body.-For use with natural, manufactured, mixed, liquefied petroleum, LP gas and air mixtures.-0.75'' IPS. Construction: -Ball construction: Forged brass.

View Product

Specifications: Brass Ball Valve End Connections: 3/4? to 3/4? female NP 600 PSI Ideal for low pressure situations 1/4'' Stainless Steel

View Product

Stop and waste valve Threaded forged Brass stop & waste ball valve Low lead Full port 500 psi 3/4in

View Product

Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools ortube inserts Exclusive O-ring guide insures zero-leak connections Tube orientation can be changed by a simple twist, reducing the amount of ...

View Product

The WaterCop control valve installs on your indoor main water supply line. The WaterCop Electric Actuator Motor (sold seperately) automatically turns off the water valve when activated by a wireless water or temperature sensor, a remote soft touch switch, or most security or home automation systems. NOTE: All WaterCop brass valves comply with published NSF61 standards which restrict lead and ...

View Product

• For domestic installations where small size and economy are important and where codes allow the use of iron body units• Fully pressure-balanced piston• Automatically reduces and regulates high inlet pressures down to 45 psi at standard factory setting• Contains an built-int back-pass check which operates independently of the regulator• This allows water to flow back through the regulator in ...

View Product

2 check valves in one assembly to protect the primary water system (city water supply) by providing containment at the water meter Prevents polluted water from entering the potable water supply system by preventing the reverse flow of water into supply lines Cast bronze body and brass union inlet connection Check subassemblies constructed with molded body seats, spring guides and ...

View Product

Intended for protection of hot water heaters and storage tanks Incorporates an inert thermal element coating that provides effective isolation from mineral deposits, liming, and galvanic corrosion Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring Test lever standard Factory-set relief settings 210F ...

View Product

Easy quarter turn operation IAPMO-ANSI/NSF-61 approved Maximum 125 PSI working pressure Chrome plated brass ball Teflon seats 60% copper alloy brass construction 3/4in hose thread outlet Large flow rate Rust resistant handle Mueller/B&K logo cast into valve body

View Product

• AGA certified ASME rated 3/4" MIP Inlet x 3/4" FIP outlet with test lever• Cast bronze body• Brass internal parts• Silicone seat disc• Stainless steel spring• Thermoplastic coated extension thermal element• Temperature relief setting is 210 degrees F• Low Lead - 150 Pound Pressure• BTU Rating: 105• 000 to 500• 000 BTU/Hr• Stem Lgth In=4

View Product