SEISMIC AUDIO - SAXLX-10 - 10' Red XLR Male to XLR Female Patch Cable - Balanced - 10 Foot Patch Cord
Balanced XLR (microphone) cables are ideal for connecting mixers, equalizers, crossovers, amplifiers... anything that requires a balanced 3 pin XLR connection. They can also be used as microphone cables or for connecting DMX lighting fixtures. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SAXLX-3 - 3' Red XLR Male to XLR Female Patch Cable - Balanced - 3 Foot Patch Cord
Balanced XLR (microphone) cables are ideal for connecting mixers, equalizers, crossovers, amplifiers... anything that requires a balanced 3 pin XLR connection. They can also be used as microphone cables or for connecting DMX lighting fixtures. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SAXLX-2 - 2' Red XLR Male to XLR Female Patch Cable - Balanced - 2 Foot Patch Cord
Balanced XLR (microphone) cables are ideal for connecting mixers, equalizers, crossovers, amplifiers... anything that requires a balanced 3 pin XLR connection. They can also be used as microphone cables or for connecting DMX lighting fixtures. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
ClearLinks 3FT Cat5E 350MHZ Red Molded Snagless Patch Cable - Category 5E for
CP Technologies copper patch cables exceed all Component ratings set by ANSI/TIA-568 requirements.
ClearLinks 5FT Cat5E 350MHZ Red Molded Snagless Patch Cable - Category 5E for
CP Technologies copper patch cables exceed all Component ratings set by ANSI/TIA-568 requirements.
ClearLinks 100FT Cat5E 350MHZ Red Molded Snagless Patch Cable - Category 5E for
CP Technologies copper patch cables exceed all Component ratings set by ANSI/TIA-568 requirements.
ClearLinks 14FT Cat5E 350MHZ Red Molded Snagless Patch Cable - Category 5E for
CP Technologies copper patch cables exceed all Component ratings set by ANSI/TIA-568 requirements.
ClearLinks 10FT Cat5E 350MHZ Red Molded Snagless Patch Cable - Category 5E for
CP Technologies copper patch cables exceed all Component ratings set by ANSI/TIA-568 requirements.
ClearLinks 7FT Cat5E 350MHZ Red Molded Snagless Patch Cable - Category 5E for Network Device - 7ft - 1 x RJ-45 Male Network - 1 ...
CP Technologies copper patch cables exceed all Component ratings set by ANSI/TIA-568 requirements.
Ziotek CAT6 Patch Cable, W/ Boot 75ft, Red - 119-07277
Your cabling infrastructure will be ready for Gigabit over copper with our 550MHz CAT6 stranded wire patch cables. Built with the same high quality as all our patch cables and with all the value you ve come to expect.
SEISMIC AUDIO - SATRXL-F6 - Red 6' XLR Female to 1/4" TRS Patch Cable
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-F3 - Red 3' XLR Female to 1/4" TRS Patch Cable
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRX-F6 - Red 6' 1/4" TRS to 1/4" TRS Patch Cable
Balanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires a balanced 1/4" connection. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-F10 - Red 10' XLR Female to 1/4" TRS Patch Cable
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-M6 - Red 6' XLR Male to 1/4" TRS Patch Cable
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
Seismic Audio - SASTSX-10 - 10 Foot TS 1/4" Guitar, Instrument, or Patch Cable Red
Unbalanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires an unbalanced 1/4" connection. TS 1/4" cables are also used for guitar, bass guitar, and instrument cables as well. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRX-F3 - Red 3' 1/4" TRS to 1/4" TRS Patch Cable
Balanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires a balanced 1/4" connection. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
Seismic Audio - SASTSX-25 - 25 Foot TS 1/4" Guitar, Instrument, or Patch Cable Red
Unbalanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires an unbalanced 1/4" connection. TS 1/4" cables are also used for guitar, bass guitar, and instrument cables as well. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
Seismic Audio - SASTSX-2 - 2 Foot TS 1/4" Guitar, Instrument, or Patch Cable Red
Unbalanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires an unbalanced 1/4" connection. TS 1/4" cables are also used for guitar, bass guitar, and instrument cables as well. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRX-F2 - Red 2' 1/4" TRS to 1/4" TRS Patch Cable
Balanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires a balanced 1/4" connection. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRX-10 - Red 10' 1/4" TRS to 1/4" TRS Patch Cable
Balanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires a balanced 1/4" connection. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
Seismic Audio - SASTSX-3 - 3 Foot TS 1/4" Guitar, Instrument, or Patch Cable Red
Unbalanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires an unbalanced 1/4" connection. TS 1/4" cables are also used for guitar, bass guitar, and instrument cables as well. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-F2 - Red 2' XLR Female to 1/4" TRS Patch Cable
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-M10 - Red 10' XLR Male to 1/4" TRS Patch Cable
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
Seismic Audio - SASTSX-6 - 6 Foot TS 1/4" Guitar, Instrument, or Patch Cable Red
Unbalanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires an unbalanced 1/4" connection. TS 1/4" cables are also used for guitar, bass guitar, and instrument cables as well. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
Seismic Audio - SAXLX-50Red-2Pack - Pair of Red 50 Foot XLR Male to Female Microphone or Patch Cable (2 Pack)Show More +
Balanced XLR (microphone) cables are ideal for connecting mixers, equalizers, crossovers, amplifiers... anything that requires a balanced 3 pin XLR connection. They can also be used as microphone cables or for connecting DMX lighting fixtures. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection. With your purchase, you will receive a pair of 50 foot ...
Seismic Audio - SAXLX-25Red-2Pack - Pair of Red 25 Foot XLR Male to Female Microphone or Patch Cable (2 Pack)Show More +
Balanced XLR (microphone) cables are ideal for connecting mixers, equalizers, crossovers, amplifiers... anything that requires a balanced 3 pin XLR connection. They can also be used as microphone cables or for connecting DMX lighting fixtures. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection. With your purchase, you will receive a pair of 25 foot ...
SEISMIC AUDIO - SATRXL-M2 - 6 Pack of Red 2' XLR Male to 1/4" TRS Patch Cables
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRX-F2 - 6 Pack of Red 2' 1/4" TRS to 1/4" TRS Patch Cables
Balanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires a balanced 1/4" connection. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-F10 - 6 Pack of Red 10' XLR Female to 1/4" TRS Patch Cables
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRX-F3 - 6 Pack of Red 3' 1/4" TRS to 1/4" TRS Patch Cables
Balanced 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers...anywhere that requires a balanced 1/4" connection. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
SEISMIC AUDIO - SATRXL-F3 - 6 Pack of Red 3' XLR Female to 1/4" TRS Patch Cables
Balanced XLR to 1/4" cables are typically used to connect mixers to equalizers, crossovers, compressors or amplifiers. Some mixers or rack mount gear have XLR connections where others have 1/4". These are ideal for adapting the two together. 22g Oxygen-Free Copper (OFC) conductors for enhanced signal clarity and superior RF rejection.
