shop by
Category
items
0 

Cisco Port Adapter - PA-MC-4T1

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

In Cisco's multichannel interface family, there are versions to support physical connectivity to T3 lines, E3 lines, T1 lines, and E1 lines. For direct termination to E1 and T1 lines, Cisco supports six versions of multichannel interfaces. For sites that require integrated T1 CSU and DSU functionality, the two, four- and eight-port multichannel T1 port adapters provide the right mix of integration and cost. For service provider applications where only DSU functionality is required (for example, at sites colocated with a carrier), the eight-port multichannel DSX1 card provides high port density at a reduced cost per port. For E1 applications, the multichannel E1/G.703 interface allows direct connectivity to 120-ohm G.703 lines.

Specifications

Manufacturer Cisco
Mfg Part# PA-MC-4T1
SKU 203026278
UPC 746320134666
UPC 14 00746320134666
Features
Interfaces/Ports Details 4 x RJ-48C Connector / 24 x Channel T1 WAN
Product Type Port Adapter
Manufacturer Part Number PA-MC-4T1=
Manufacturer Cisco Systems, Inc
Product Name Port Adapter
Brand Name Cisco
Media Type Supported Twisted Pair
Compatibility Cisco 7100Cisco 7200Cisco 7200VXRCisco 7500/VIP2Catalyst RSM/VIP2 in Catalyst 5000 family switches
Application/Usage Data Networking
Limited Warranty 90
Tech Specs
Status Indicators Enabled LED One status LED for each port
Interfaces/Ports Details 4 x RJ-48C Connector / 24 x Channel T1 WAN
Product Type Port Adapter
Manufacturer Part Number PA-MC-4T1=
Manufacturer Website Address www.cisco.com
Manufacturer Cisco Systems, Inc
Product Name Port Adapter
Brand Name Cisco
Data Transfer Rate 1.54 Mbps T1
Connectivity Media 100 ohm STP
Additional Information Key Features: Channelized T1, fractional T1, full rate T1, and ISDN PRI supported Internal or network clocking selectable on each port Line and payload loopback capabilities Full bit error rate testing capabilities on any T1 Alarm detection: alarm indication Support for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections T1/DSX1 version features: D4 (Super Frame [SF]) and Extended Superframe (ESF) framing Alternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encoding Internal and loop (recovered from network) clocking Full FDL support and FDL performance monitoring, according to configurable standard: ANSI T1.403 or AT&T TR 54016 Selectable DSX-1 cable length in increments from 0 to 655 feet Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB Selectable DS1 CSU receiver gain: 26 or 36 dB DS1 line protection per UL1459/1950, FCC part 68
Compatibility Cisco 7100 Cisco 7200 Cisco 7200VXR Cisco 7500/VIP2 Catalyst RSM/VIP2 in Catalyst 5000 family switches
Certifications & Standards T1/DSX1 Compliance: ANSI T1.403 US (UL 1950, 1459, T1) FCC Part 68 Canada (C1950, T1) US (FCC part 15J Class A, T1) U.K. (BS6301, EN60950, EN41003) Canada (CSA C108.8 Class A, T1) Bellcore-AT&T Accunet (62411) ATT 54016 Japan (VCCI Class 2, T1)
Protocols PPP / HDLC / X.25 / Frame Relay / IP / IPX
Management Full support for DSX-1 Management Information Base (MIB, RFC 1406), including alarm detection and reporting DSX-1 MIB remote access supported
Application/Usage Data Networking
Standard Warranty 90 Day Limited
loading
Sold Out
Sorry, you missed the deal!
This product is currently not available.
ADVERTISEMENT
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details
ADVERTISEMENT
ADVERTISEMENT