shop by

Cisco WAP2000 Wireless-G Access Point with Power over Ethernet - WAP2000

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

The Cisco® WAP2000 Wireless-G Access Point is ideal for small businesses that want to expand their existing wired networks or create new wireless networks for their workforce or guests. It features RangeBooster technology that is comparable to standard 802.11g but with nearly twice the range and with throughput that is up to 35 percent faster. Unlike ordinary wireless technologies that are hampered by wireless signals that reflect off walls, ceilings, and other objects, RangeBooster uses these multiple signals with two smart receivers at each end (router or access point and client adapter) to boost range and throughput speeds. As a result, a RangeBooster solution reduces or eliminates wireless signal dead spots in offices and other buildings so users can connect to the network in more areas. The Cisco WAP2000 comes with two 3-dBi for increased power, also helping to extend the range of the access point.

Advanced security features such as Wi-Fi Protected Access™ (WPA2) make this solution ideal for your business. Integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling your workforce to communicate or view video content without disruptions and delay.

The Cisco WAP2000 can be powered from the included AC adapter or from a Power over Ethernet (PoE) switch via Ethernet cabling, enabling it to be mounted in ceilings or high on walls where power outlets may not be available.

Additional features like multiple basic service set identifiers (BSSIDs), wireless roaming, and auto-channel selection give your business added flexibility to keep employees and guests connected. The Cisco WAP2000 also features dual firmware images, so it remains functional if a firmware upgrade process is disrupted.


Manufacturer Cisco Small Business
Mfg Part# WAP2000
SKU 206178322
UPC 745883578337
UPC 14 00745883578337
Product Guide Click Here for the Cisco Small Business Store
10BASE-T/100 BASE-TX Ethernet port, auto-sensing half/full duplex, and automatic medium dependent interface (MDI) and MDI crossover (MDI-X) detection
Full backward compatibility with 802.11b
Easy installation and configuration via a web Interface
Dual images for resilient firmware upgrades
Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, and WPA2-ENT authentication (802.11i ready)
SMA detachable dipole antennae with 1x2 multiple-input, multiple-output (MIMO) to increase coverage
Supports PoE or external DC power
Supports 4 BSSIDs and 802.1Q VLAN to service set identifier (SSID) mapping
Supports Simple Network Management Protocol (SNMP) and uses an intuitive web-based interface
Wi-Fi Multimedia (WMM) wireless QoS support, upgradable to 802.11e
Supports wireless roaming based on 802.11F (Inter-Access Point Protocol [IAPP])
Supports access point mode, bridge mode, and repeater mode
Supports wireless client isolation
Metal casing
Tech Specs
Standards: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2), 802.11e ready (wireless QoS), 802.11F (wireless roaming)
Ports: 10BASE-T/100BASE-TX Ethernet, 12V DC power
Buttons: Reset
Cabling type: Unshielded twisted pair (UTP) Category 5
LEDs: Power, PoE, Wireless, Ethernet
Operating system: Linux
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP version: SNMP version 1, 2c, 3
Event logging: Email notification, Remote syslog
Web firmware upgrade: Firmware upgradable through web browser
Diagnostics: Flash, RAM, LAN, WLAN
Dynamic Host Configuration Protocol (DHCP): DHCP client
Access point: Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode
Spec/modulation: Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM
Channels: Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
Internal antennas: None
External antennas: 2 (omnidirectional) 3 dBi SMA detachable
Transmit power: Transmit power (adjustable) @ normal temp range: 802.11b: 18 dBm; 802.11g: 16 dBm
Antenna gain in dBi: 3
Receiver sensitivity: 802.11.g: 54 Mbps @ -72 dBm, 802.11.b: 11 Mbps @ -85 dBM
Access control: Wireless connection control: MAC-based
SSID broadcast: SSID broadcast enable/disable
802.1X: IEEE 802.1X support
Wireless client isolation: Wireless client devices can be Isolated from each other either within an SSID or between 2 SSIDs
Dimensions: 8.66 x 6.69 x 1.50 in.
Weight: 1.69 lb (0.765 kg)
Power: 12V 1A DC input, and IEEE 802.3af compliant PoE max power draw: 3.48W
Certification: FCC, ICES 003, CE
Operating temperature: 14º to 131ºF (-10º to 55ºC)
Storage temperature: -22º to 158ºF (-30º to 70ºC)
Operating humidity: 10% to 90%, noncondensing
Storage humidity: 5% to 95%, noncondensing
Minimum Requirements:
802.11b, 802.11g wireless adapter with TCP/IP protocol installed per PC
Switch/router with PoE support or PoE injector when used with PoE
Web-based configuration: Java-enabled web browser
Product Warranty: 3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty.
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code rewardme Ends 6/30/2017. *See page for details