The directions to set it up were not very helpful. Its on a 192.168.10.100 network where most networks are 192.168.1.1 by default. It took some searching around but found these steps that were helpful setting it up
1. Connect TrendNet directly to Ethernet
2. Set your LAN IP address to 192.168.10.110, subnet mask 255.255.255.0. Don't need to set gateway or DNS.
3. Open web browser, go to http://192.168.10.100
TRENDnet’s 450Mbps Wireless N Access Point, model TEW-690AP, supports Access Point, Wireless Distribution System (WDS), and Repeater mode functionality.
Advanced Multiple Input Multiple Output (MIMO) antenna technology with three spatial streams per antenna, generates a maximum theoretical wireless throughput of 450Mbps and exceptional wireless coverage.
A Gigabit Ethernet port maintains high performance wired connections. Wi-Fi Protected Setup (WPS) integrates other WPS supported devices at the touch of a button. Advanced features include 4 SSIDs per wireless band, different encryption for each SSID, WMM Quality of Service data prioritization, WPA2-RADIUS encryption, and a convenient on/off power switch.