Power Probe PP3EZGRNAS Power Probe 3EZ with Case & Accessories - GreenEasy Learning – Teaches a new user how to use the functions in the tool.Easy Diagnostics – Guides a user through simple tests such as Battery Testing, Charging System Testing, Fuse Testing, and Voltage Checks. Simply scan the QR Code with your Smart Device, which will link to a video to guide the user to perform these tests.The easy to read LCD display – Provides easy to see readings with a simple navigation menu to get to what you need fast.Upside Down? No Problem!With a new flip screen feature, you can see screen readings while holding the tool upside down.Safety First. The 8 amp thermal circuit breaker provides protection while powering up components, relays or circuits while still allowing inrush current for larger draw components.It’s Menu Driven. The PP3EZ has a menu driven screen that makes navigating a breeze for easier diagnosing of electrical issues.This is an essential electrical tool. The PP3EZ is an all-in-one tool with DC Voltmeter, MIN, MAX, and Peak to Peak mode, along with audio signal capability (AC Threshold). Storage temperature/humidity: -20 to 70 °C, 70% RH max Operating temperature/humidity: -10 to 50 °C, 70%RH max Pollution degree:2Voltage & Polarity testingContinuity testingActivating components out of the vehicle’s electrical systemActivating electrical components in the VehicleActivating electrical components with groundTesting trailer lights and connectionsChecking for bad ground contactsRed/Green Indicator & Audio ToneDC 0 to +70V +1 DigitP-P 0 to +70V The frequency response for tone pass through10Hz to 10kHz PP Display15 Hz Square Wave35 Hz Sine Wave Power Probe Mode – Continuity to groundFirst level – Display is enabled less than 20 K ΩSecond level – Green LED is enabled less than approx. 600 Ω – & +Peak Detector ResponseSingle event capture less than 200ms pulse widthRepetitive events less than 1ms pulse width Peak to Peak Mode0 to + 70 + 1 Digit4Hz to over 500kHz Square Wave input4Hz to over 250kHz Sine Wave inputThe threshold for PPAC/Audible passthroughOverVolt Warning!! If the probe tip connects to a voltage greater than +70 Volts the display will show an “Over Volt” warning. Remove the probe tip immediately to prevent internal damage to the tool. Over Load Warning If the probe is connected to a battery with a voltage greater than 34 VDC the display will show an “Over Load” warning.Circuit Breaker 8 amp thermal response – Manual resetTypical Response 8 amps          10amps      15amps     25amps    Short Circuit No Trip          20min       6 sec.         2 sec.        0.3 sec.The PP3EZAS Kit includes:Power Probe 3EZOptional 20ft Extension Lead (with AS Kit) for a total of 40ft. (Perfect for working on large trucks or trailers)Optional Cigarette Lighter Adapter (with AS Kit)Battery Clip-Set (for connecting to vehicle battery)Convenient Carrying Case